Completing The Bri Installation; Ddi/Did/Msn Services - 3Com NBX 100 Installation Manual

Completing the BRI
Installation
DDI/DID/MSN
Services
Figure 104 Digital Line Cards, Manage Group Membership Window
5 Scroll through the list to make sure that all eight channels are present.
To complete the BRI installation, perform these steps.
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select ISDN PRI Channel List.
3 Click Apply.
4 Wait (approximately 30 seconds) for the status of each channel to change
from Ready to Idle.
While you are waiting, you can click Apply to refresh the list of channels
and see the updated status.
When you order T1 services with DID (or E1 or BRI with DDI or MSN), the
local telephone carrier assigns a block of telephone numbers to you.
Usually, you can request a specific range of numbers, but sometimes the
carrier assigns numbers other than the ones you requested.
You may be able to request that the local telephone carrier pass you a
specific number of digits for each incoming telephone call. Sometimes
the carrier does not offer any choice. In either situation, you need to
know how many digits the carrier passes.
Configuring the ISDN BRI Digital Line Card 265