3Com NBX 100 Installation Manual page 175

Table 31 System Settings (continued)
Field
Subnet Mask
Network Protocol
Free Memory
MOH MAC Address
Date and Time
3 To make changes to System-wide settings, click System-wide on the
System Settings tab. The System Settings window appears (Figure 48).
Figure 48 System Settings Window
Configuring System-Level Settings
Purpose
An IP setting that identifies the network and host portions
of an IP address on the network.
The transport mechanism for voice packets.
Ethernet only: All communications are at the Ethernet
frame layer.
Standard IP: IP communications are used for traffic
between NBX 100 addresses. Note: Every device needs an
IP address.
IP-on-the-fly: An implementation of IP communications in
which devices on the same subnet as the call processor
communicate using Ethernet frames. They receive IP
configuration settings only when necessary, to
communicate with an IP device on some other subnet.
Available memory on the NBX 100.
The hardware address of the Music-on-Hold device.
The current system date and time. To modify, click the Date
and Time button.
175