Enabling Regional Settings - 3Com NBX 100 Installation Manual

178 C 4: C
HAPTER ONFIGURING
Enabling Regional
Settings
NBX 100 S -L
YSTEM EVEL
After you have installed regional software and components, you can
enable these settings. Installing the regional Internationalization Packs
makes the regional components available on you NBX 100, but to enable
these regional settings you must select the appropriate country and
language as described in this section.
See "Selecting Regional Software and Components" on page 159 for
information on installing regional Internationalization Packs,
To enable regional settings:
1 On the System Settings tab (Figure 48), click Regional Settings. The
Regional Settings window appears (Figure 49).
Figure 49 Enabling Regional Settings
2 From the pull-down list, select the country and language.
A Country and language selection is available only if the corresponding
Internationalization Pack has been installed.
3 Click OK. The selected language-specific regional components are now
enabled.
S
ETTINGS