Checking Group Membership; Completing The T1 E&M Installation - 3Com NBX 100 Installation Manual

246 C 7: C
HAPTER ONFIGURING
Checking Group
Membership
Completing the T1
E&M Installation
D L C (T1, E1,
IGITAL INE ARDS
To check that all channels are in the member list perform these steps.
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select T1 Group List.
3 Click Apply.
4 Select the group you want, and click Membership.
Figure 92 Digital Line Cards, Manage Group Membership Window
5 Scroll through the list to make sure that all 24 channels are present.
To complete the T1 installation, perform these steps.
1 Return to the Digital Line Cards tab.
2 From the Select Device Type list, select T1 Channel List.
3 Click Apply.
4 Wait (approximately 30 seconds) for the status of each channel to change
from Ready to Idle.
While you are waiting, you can click Apply to refresh the list of channels
and see the updated status.
BRI C )
AND ARDS