Sample Solutions Using Dial Plan Configuration File Commands - 3Com NBX 100 Installation Manual

Sample Solutions
Using Dial Plan
Configuration File
Commands

Sample Solutions Using Dial Plan Configuration File Commands

This section describes several requirements that a customer might have,
and for each one, provides a sample solution. An explanation follows
each step in the solution.
Customer Requirement 1
Requirement: The telephone company assigns a group of four-digit
DID/DDI numbers from 6000 through 6199; however, the client's
company wants to use internal telephone extensions from 3000 through
3199. Also, the client's company wants the number 6111 to connect the
caller to an auto attendant line for the customer service group.
Action: Add these lines to the Dial Plan configuration file:
PreTranslator Create 1 6XXX to 3XXX Translator
Explanation: Creates PreTranslator 1, and names it "6XXX to 3XXX
Translator"
PreTranslatorEntry Create 1 1 6111
Explanation: Creates the first entry in PreTranslator 1; this entry looks for
the specific sequence of digits 6111.
PreTranslatorOperation Create 1 1 1 replace 5502
Explanation: Creates the first operation associated with PreTranslator 1,
PretranslatorEntry 1. Defines a replace operation that replaces all digits in
the incoming sequence (6111) with 5502. In this example, 5502 connects
you to the auto attendant menu for customer service.
PreTranslatorEntry Create 1 2 6
Explanation: Creates, the second entry in PreTranslator 1; this entry looks
for any incoming digit string beginning with the number 6.
PreTranslatorOperation Create 1 2 1 stripLead 1
Explanation: Creates the first operation associated with PreTranslator 1,
PreTranslatorEntry 2. Defines a stripLead operation that removes (strips)
the first (leading) digit from the incoming 4-digit sequence. This removes
the 6 from the incoming numbers (6000 through 6199) leaving 3-digit
numbers from 000 to 199.
119