Viewing Regional Software Details - 3Com NBX 100 Installation Manual

Viewing Regional
Software Details
1 On the Operations Regional Software tab, click the Details button. (See
2 For In Use regional software, you will see an informational display
cannot be removed). If you accept this option and remove all
components, that region will be unavailable for all versions of the NBX
100 software. Click OK to remove the region.
IWhen you remove a region, all versions of that region are removed. For
example, if you remove the "Mexico (Spanish)"region, all versions of this
regional sofware are removed from the system. Other regions that use
Spanish are unaffected.
You can view the details of a regional installation. This shows the precise
version number of each installed component and provides other
information that is valuable for troubleshooting purposes.
Figure 40.) If any components associated with a region are installed, that
region will be listed.
For each listed region, you will see a status:
Table 28 Regional Software Status
Status
In use
Available
Notf fully installed
Error while loading
Not installed
comparable to this one:
Selecting Regional Software and Components
Description
All of the components associated with the
language and country are installed and selected
for use.
All of the components associated with the
language and country are installed, but none of
them are currently selected for use.
One or more of the components associated with
the language and country are either not
installed, or the wrong version of a component is
installed. This usually indicates that you have not
installed the correct regional software for the
system software version that you are running.
One or more of the files associated with a
component ar missing. You should re-install the
software.
The system is aware that the regional software
exists, but it has not been installed.
163