Installing License Keys; Changing Default Passwords; Setting Up Database Replication; System Configuration - 3Com VCX Connect Installation And Configuration Manual

22 C 2: VCX™ C
HAPTER
S I
ONNECT ERVER NSTALLATION
3 Move both primary and secondary VCX Connect servers to their final
location and reconnect them to power and to the network segment on
which they will operate.
4 Start the primary and secondary VCX Connect servers and wait for
approximately 5 minutes for the boot processes to be completed.

Installing License Keys

VCX Connect 100 and VCX Connect 200 servers come from the factory
with pre-installed licenses to support:
25 telephone users
25 voice mailboxes
If you obtained additional licenses, install the license keys on the primary
and secondary VCX Connect servers. The primary and secondary licenses
must match in terms of the number of telephone users and the number
of voice mailboxes.
For instructions on how to obtain and install license keys, see:
VCX Installation Guide > Pre-Installation Guidelines > License Keys

Changing Default Passwords

To change the default passwords for the app, cworks, oracle, root,
tomcat, and vcx accounts, log in to each server and run the
vcx-reconfigure script. Accept the default answers for all prompts that are
not related to passwords, and, when prompted for the account
passwords, change the default values.

Setting Up Database Replication

Set up database replication between the primary and secondary servers.
For instructions, see:
VCX Maintenance Guide > Manually Configuring Multi-Master
Replication > Manually Configuring Replication for an IP
Telephony Server or IP Telephony and Messaging Server

System Configuration

Your VCX Connect system is now configured to communicate in an IP
network. The next steps are described in these sections:
"IP Telephony Configuration"
"IP Messaging Configuration"
"Additional Configuration Steps"
on page 40
on page 42
on page 43