Controlling Caller Id; Setting Up A Conference Call - 3Com VCX Manual

Controlling Caller ID

Setting up a Conference Call

The Display Panel shows the first user in the directory. Use the Scroll buttons to locate
a particular user. The three Soft buttons below the Display Panel have the following
functions when viewing the User Directory:
Use the Slct button to select a user and dial that user's extension.
Use the Back button to display sort order options.
Press the Slct button to sort by first name.
Press the Back button to sort by last name.
Press the Exit button to sort by extension.
Use the Exit button to return to the default Display Panel.
This section describes how to enable and use Caller ID privacy features.
By default, the VCX system shows your Caller ID (your name and extension) on the
Display Panel of the telephone receiving your call if that telephone supports Caller ID.
You can control whether the VCX system sends your Caller ID when you make a call.
You can choose one of the following settings:
Select one of the following settings for all your calls:
Send Caller ID information (Anonymous Now is disabled).
Block Caller ID information (Anonymous Now is enabled).
Block Caller ID information for your next call. This setting only applies when the
setting for all calls is set to Send Caller ID information. You must enter the destination
number to call.You can control these settings by entering the appropriate feature
code.
Anonymous Now— When enabled, the system blocks your Caller ID to all dialed
numbers and Anonymous displays on the destination phone.
Anonymous Next — When enabled, the system restricts Called ID information from
displaying only on the next call that you make. This setting only applies when
Anonymous Now is disabled, or the setting for all calls is set to Send Caller ID
information.
If you disable Caller ID, the system sends your Caller ID to all dialed numbers.
To toggle the current default setting, press Feature + 889. If Caller ID is enabled,
entering this command disables it for all subsequent calls. If Caller ID is disabled,
entering this command enables it for all subsequent calls.
If transmission of Caller ID information is enabled and you want to block your Caller ID
for the next call only:
1) Pick up the handset.
2) Press Feature + 890.
3) Dial the number. Your ID is not delivered to the caller.
The conference feature enables you to have up to six parties, including the conference
originator, on one conference with the capability to extend a conference through
cascading. Conferences can be multi-site capable where any endpoint in a conference