Dialing A Call To A Remote Office; Using Unique Extensions - 3Com 3102 User Manual

100 C 7: G
HAPTER ETTING
Dialing a Call to a
Remote Office
Using Unique
Extensions
M Y T
ORE FROM OUR ELEPHONE
You can cancel an MWI message only from the same extension from
which you sent the MWI message.
To cancel an MWI message:
1 Pick up the handset and press Feature + 413. Or press the MWI Cancel
access button. The display panel on your 3Com Telephone shows Cancel
MWI To:.
2 Dial the extension to which you sent the MWI message that you want to
cancel and press #.
3 The display panel on your 3Com Telephone shows Cancel Sent.
You can dial calls between sites in your organization that are separated
geographically but that are linked by a Wide Area Network (WAN)
connection. Each site must have an NBX system. Typical configurations
are described in the next sections.
In the sample network shown in
organization has a unique telephone extension. Whenever you make a
call to an extension that is not located at your own site, your NBX system
sets up a connection to the NBX system at the other extension's site.
In this example, to call a user in Dallas, a user in Chicago dials a Dallas
extension (3000 through 3999). The dial plan on the Chicago NBX system
sets up the necessary connection to the Dallas NBX system and then to
the extension at that site.
S
YSTEM
Figure 7, everyone in the entire