Alcatel-Lucent 5620 Troubleshooting Manual page 229

4
Option
auxstart
auxstop
auxappserver_status
auxstatus
auxforce_restart
auxforce_stop
auxscript_env
no keyword, help, or ?
5
6
7
Alcatel-Lucent 5620 Service Aware Manager, Release 6.1 R3
3HE 04244 AAAB Ed. 01
To check the status of a 5620 SAM auxiliary server, perform the following steps.
i Enter the following at the CLI prompt:
path/nms/bin/nmsserver.bach aux_status ↵
where
path is the 5620 SAM server installation location, typically opt/5620sam/auxserver
The general 5620 SAM server application status is displayed.
ii Enter the following at the CLI prompt:
path/nms/bin/nmsserver.bach appserver_status ↵
where
path is the 5620 SAM server installation location, typically opt/5620sam/auxserver
Detailed 5620 SAM server information is displayed.
iii To obtain more specific server status information, run the nmsserver script
using the appropriate option from Table
appserver_status option.
Table 10-2 5620 SAM auxiliary-server startup script options
Description
Starts the 5620 SAM auxiliary server
Stops the 5620 SAM auxiliary server
Returns information about the operational status of the auxiliary server
Returns information about the auxiliary server that includes the
following:
•
IP address
•
port number
•
database connections
•
installed server software build version
Forces the auxiliary server to restart
Forces the auxiliary server to stop
Returns auxiliary server script environment information
Lists the available command options
Review and record the displayed information for Alcatel-Lucent
technical-support, if required.
Close the console window.
View the 5620 SAM server logs for error messages using the 5620 SAM LogViewer
GUI application, as described in chapter 6.
Troubleshooting Guide
10 — Troubleshooting 5620 SAM server issues
10-2 in place of the aux_status or
November 2008 10-5