Page 2
The customer hereby agrees that the use, sale, license or other distribution of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the use, sale, license or other distribution of the products in such applications.
Page 3
Alcatel-Lucent License Agreement SAMPLE END USER LICENSE AGREEMENT 1. LICENSE 1.1 Subject to the terms and conditions of this Agreement, Alcatel-Lucent grants to Customer and Customer accepts a nonexclusive, nontransferable license to use any software and related documentation provided by Alcatel-Lucent pursuant to this Agreement ("Licensed Program") for Customer's own internal...
Page 4
3.2 Alcatel-Lucent may terminate this Agreement: (a) upon notice to Customer if any amount payable to Alcatel-Lucent is not paid within thirty (30) days of the date on which payment is due; (b) if Customer becomes bankrupt, makes an assignment for the benefit of its creditors, or if its assets vest or become subject to the rights of any trustee, receiver or other administrator;...
Page 5
Alcatel-Lucent infringes any patent, copyright, trade secret or other intellectual property right, provided that Customer notifies Alcatel-Lucent within ten (10) days of the existence of the claim, gives Alcatel-Lucent sole control of the litigation or settlement of the claim, and provides all such assistance as Alcatel-Lucent may reasonably require.
Page 6
8.4 The Licensed Program may contain freeware or shareware obtained by Alcatel-Lucent from a third party source. No license fee has been paid by Alcatel-Lucent for the inclusion of any such freeware or shareware, and no license fee is charged to Customer for its use.
Page 7
8.9 No term or provision of this Agreement shall be deemed waived and no breach excused unless such waiver or consent is in writing and signed by the party claimed to have waived or consented. The waiver by either party of any right hereunder, or of the failure to perform or of a breach by the other party, shall not be deemed to be a waiver of any other right hereunder or of any other breach or failure by such other party, whether of a similar nature or otherwise.
Preface The Preface provides general information about the 5620 Service Aware Manager documentation suite, including this guide. Prerequisites Readers of the 5620 SAM documentation suite are assumed to be familiar with the following: • 5620 SAM software structure and components •...
Page 10
5620 SAM system 5620 SAM User Guide The 5620 SAM User Guide provides information about using the 5620 SAM to manage the service-aware IP/MPLS network, including GUI basics, service configuration, and policy management.
Page 11
The 5620 SAM online help system includes a Parameter Search Tool that allows you to look up parameters or 5620 SAM and 5650 CPAM forms. See the 5620 SAM User Guide for more information about using the Parameter Search Tool.
Page 12
The 5620 SAM LTE RAN User Guide describes how to discover, configure, and manage Guide the Evolved NodeB, or eNodeB, using the 5620 SAM. The guide is intended for LTE RAN network planners, administrators, and operators and is to be used in conjunction with other guides in the 5620 SAM documentation suite where management of RAN devices does not differ from other network elements.
5620 SAM product alerts Product technical alerts are used to communicate important information to customers about released loads. You can view and subscribe to product alerts for the 5620 SAM from the Alcatel-Lucent Customer Support Center. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5...
You can use the Search function of Acrobat Reader (File→Search) to find a term in a PDF of any 5620 SAM document. To refine your search, use appropriate search options (for example, search for whole words only or enable case-sensitive searching).
Page 15
Table 3 Bits and bytes conventions Measurement Symbol byte byte kilobits per second kb/s Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Caution indicates that the described activity or situation may, or will, cause service interruption. Note — Notes provide information that is, or may be, of special interest. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Important information..............xvi Getting started 1 — What’s new? New 5620 SAM features for 9500 MPR/9500 MPRe devices ....... 1-2 What’s new in 5620 SAM Release 11.0 ..........1-2 2 — 9500 MPR/9500 MPRe overview 5620 SAM management of 9500 MPR/9500 MPRe devices ......2-2 MSS-1 shelf ................
Page 18
Workflow to commission 9500 MPR/9500 MPRe devices ......3-5 9500 MPR/9500 MPRe device commissioning and management procedures ................ 3-5 Procedure 3-1 To commission a 9500 MPR/9500 MPRe for 5620 SAM management ..............3-6 Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe devices ................
Page 19
Procedure 7-13 To remove 9500 MPR port protection ......7-16 Procedure 7-14 To configure a loopback test on a 9500 MPR DS1, ES1, or 1 x radio modem port ..........7-16 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
Page 20
Procedure 10-6 To delete a VLAN group or group member ....10-13 Procedure 10-7 To delete a 9500 MPR VLAN path ......10-14 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
1 — What’s new? 1.1 New 5620 SAM features for 9500 MPR/9500 MPRe devices 1.2 What’s new in 5620 SAM Release 11.0 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
11.0 R5 features No features have been added for 9500 MPR/9500 MPRe devices for this release. 11.0 R4 features 5620 SAM Release 11.0 R4 is a maintenance release. No features have been added. 11.0 R3 features SAM-5982 NTP configuration for...
Page 27
9500 MPR. 11-5 11.0 R2 features 5620 SAM Release 11.0 R2 is a maintenance release. No features have been added. 11.0 R1 features SAM-13791 9500 MPRe integration The 5620 SAM supports the integration of the...
Page 28
1 — What’s new? September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 29
2 — 9500 MPR/9500 MPRe overview 2.1 5620 SAM management of 9500 MPR/9500 MPRe devices 2.2 Workflow to manage 9500 MPR/9500 MPRe devices Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
LAG objects • services and service tunnels • NEtO The 5620 SAM also supports the native management of the 9500 MPRe, a variant of the 9500 MPR. See “9500 MPRe support” in this section. MSS-1 shelf The MSS-1 is a 1-rack-unit, 1-slot shelf. The first four ports of this shelf are Ethernet ports.
XPIC. 9500 MPR LAG objects The 5620 SAM supports the configuration and discovery of the L1 LAG associations from the 5620 SAM or NEtO external element manager for equipment functions on the 9500 MPR (ANSI and ETSI), Release 3.4 or later. See chapter 5.
The first time a user cross-launches the NEtO, the 5620 SAM Java Webstart installs the application on the 5620 SAM client system. Any update to the NEtO installation files on the 5620 SAM server results in an update to the NEtO installation on the client system.
(such as moving service access from one DS1 port to another) do not result in data loss. The 5620 SAM only takes the following additional actions to accommodate service changes made using the NEtO: •...
Commission 9500 MPR/9500 MPRe devices for 5620 SAM management; see chapter 3. Use the 5620 SAM to discover 9500 MPR/9500 MPRe devices; see the ”Device discovery” chapter in the 5620 SAM User Guide. View, manage, and configure 9500 MPR/9500 MPRe device network objects as required;...
Page 35
Collect 5620 SAM and NE statistics to monitor the 5620 SAM and 9500 MPR/9500 MPRe devices, network and service performance, compile equipment usage and billing data, and ensure SLA compliance; see the 5620 SAM Statistics Management Guide. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5...
Page 36
2 — 9500 MPR/9500 MPRe overview September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
The 5620 SAM supports in-band and out-of-band management of devices. When you configure in-band management only, management traffic between the 5620 SAM and a 9500 MPR/9500 MPRe is transmitted through any port that is configured for network access, but not the management port. Using in-band management, the 5620 SAM sends management traffic to the system IP address of the device, or to an optional L3 management interface.
Perform the following network configuration: Verify that you can ping the local IP address of all the NEs from the 5620 SAM server. Verify that you can ping the 5620 SAM server IP from each of the 9500 MPR NEs.
Page 42
When radio link aggregation is enabled for any of the radio links between two 9500 MPRs, all radio links must belong to the same LAG. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Prepare the 9500 MPR for 5620 SAM management by commissioning the device before discovery by the 5620 SAM; see the “Device commissioning and management” chapter in the 5620 SAM User Guide for the generic procedures that apply to this device type. In addition, perform the following device-specific procedures as required: Enable and configure SNMP on a 9500 MPR device and configure a 5620 SAM mediation policy and discovery rule;...
Procedure 3-1 To commission a 9500 MPR/9500 MPRe for 5620 SAM management Perform this procedure to configure a 5620 SAM mediation policy and discovery rule for a 9500 MPR. Note — Ensure that you create the mediation policy based on whether the 9500 MPR device supports SNMPv2 or SNMPv3, along with the appropriate Trap mediation policy with community string.
Page 45
SNMPv3 user. Configure an SNMPv3 mediation security policy for the SNMPv3 user created in step 3. Choose Administration→Mediation from the 5620 SAM main menu. The Mediation (Edit) form opens with the General tab displayed. Click on the Mediation Security tab.
Page 46
If you plan to use a 5620 SAM auxiliary server to collect 9500 MPR statistics using IPv4 or IPv6, perform the following steps. Choose Administration→System Information from the 5620 SAM main menu.
Procedure 3-3 To enable 5620 SAM management of 9500 MPR/9500 MPRe devices Perform this procedure to enable the 5620 SAM to manage a 9500 MPR or 9500 MPRe, and to enable the opening of NEtO sessions using the 5620 SAM GUI.
Page 48
5620 SAM GUI. Log in to a 5620 SAM client station. Discover a 9500 MPR or 9500 MPRe NE and verify that the 5620 SAM can manage the device. Note — If this is the first time you are enabling 5620 SAM management...
Page 49
3 — 9500 MPR/9500 MPRe device commissioning and management Select the equipment view of the navigation tree on the 5620 SAM GUI. Right-click on a 9500 MPR or 9500 MPRe NE, and select External Element Manager from the menu. Verify that the NEtO software launches.
Page 50
3 — 9500 MPR/9500 MPRe device commissioning and management 3-12 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 51
4.1 9500 MPR/9500 MPRe object configuration overview 4.2 Workflow to configure and manage 9500 MPR/9500 MPRe device objects 4.3 9500 MPR/9500 MPRe device object configuration procedures Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Device object properties forms, which are used to configure specific parameters for discovered devices, are accessed using objects on the 5620 SAM navigation tree. See the “Navigation tree overview” chapter in the 5620 SAM User Guide.
Procedure 4-2 To resolve 9500 MPR MIB inconsistencies Perform this procedure to resolve inconsistencies created due to MIB population failures that can occur during service creation on a 9500 MPR NE. Alcatel-Lucent recommends that inconsistencies be resolved before any service creation. For failures during 9500 MPR service creation, perform a resynchronization of the NE in order to restore existing NE entries.
For information about user security, creating a scope of command role, and creating a scope of command profile, see the 5620 SAM System Administrator Guide. If required, verify that you have the correct version on Java installed on your client system.
Using an account with an assigned security scope of command role, choose Administration→Security→5620 SAM User Security from the 5620 SAM main menu. The 5620 SAM User Security - Security Management (Edit) form opens with the General tab displayed. Click on the Scope of Command tab.
Page 56
4 — 9500 MPR/9500 MPRe object configuration September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 57
5.1 Working with 9500 MPR device LAG objects 5.2 Workflow to configure and manage 9500 MPR device LAG objects 5.3 9500 MPR device LAG configuration procedures Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Create LAG from the LAG object navigation tree contextual menu. 9500 MPR device LAG objects The 5620 SAM supports the configuration and discovery of the L1 LAG associations from the 5620 SAM or NEtO external element manager for equipment functions on the 9500 MPR (ANSI and ETSI), Release 3.4 or later.
The following workflow describes the sequence of high-level tasks required to configure and manage 9500 MPR LAG objects; see the “Logical group object configuration” chapter in the 5620 SAM User Guide for the generic procedures that apply to this device type. Also, configure the following device-specific tasks and functions.
Page 60
LAG properties. Click on the Close button to close the form. The LAG appears under the LAGs icon in the navigation tree. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
State of the LAG must be set to Down. A LAG can be shut down only when the LAG is not a part of any service or physical link. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
Page 62
5 — 9500 MPR LAG object configuration September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 63
9500 MPR/9500 MPRe devices 6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe devices 6.5 9500 MPR/9500 MPRe shelf object configuration procedures Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Card slot objects for 9500 MPR/9500 MPRe devices can be configured for plug-in cards; there are no daughter cards associated with these devices. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
The MSS-1 has a fixed card; support is available from R4.1 onward. MSS-8 ✓ ✓ Advanced Fan MPR 4.2 MSS-4 onwards Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 66
Ethernet ports; port 4 can be used as another management port, if required • two SFP Ethernet ports; the ports are supported by the 5620 SAM when an SFP MDA is installed • up to six MPT radio ports; ports 1 to 4 support MPT-HC, MPT-HCv2, and MPT-MC;...
Page 67
Note — under the Odd/Main card slot and are labeled as main and spare on the 5620 SAM equipment tree. For example, if slots 5 and 6 on the 1 × radio modem card are protected, the corresponding protected entities on the NEtO (channels 0 and 1) display as 5/0 and 5/1 under card 5 on the 5620 SAM GUI.
Page 68
• provide 1+1 EPS protection for information about configuring ports on the 2 × DS3 card. See Procedure September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
(Channelized) card. AUX alarm card The AUX alarm card provides support to monitor a number of housekeeping, station input, and station output alarms. The 5620 SAM support for the AUX alarm card only applies to following alarm types: • card fail •...
5620 SAM User Guide. Note 2 — If the 9500 MPRe is discovered as a standalone device on the 5620 SAM, then later changed to single NE mode, you must manually remove the 9500 MPRe node from the database because it shows as unreachable on the 5620 SAM.
Page 71
Note 2 — You can use the MCT only if the 9500 MPRe is in standalone mode and managed by the 5620 SAM. If the 9500 MPRe is connected to the 7705 SAR in standalone mode, but not managed by 5620 SAM, you must use the NEtO/MCT.
Perform this procedure to manage the software in the 9500 MPR/9500 MPRe committed and standby banks. You can upgrade or downgrade the running software release on a 9500 MPR/9500 MPRe. See the 5620 SAM System Administrator Guide for information about creating software upgrade policies and performing software upgrades.
• Polarity Click on the OK button. The Auxiliary Inputs (Edit) form closes and the Fan Tray (Edit) form reappears. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 6-11 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Verify that the protection is enabled. The status of the main card should be Active and the status of the spare card should be Standby. 6-12 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
To switch radio links that terminate on 2+2 (EAS), 4+4 (EAS), or CORE-ENH cards, go to step 11. The configuration to perform the switchover for these card types is done at the port level. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 6-13...
Page 76
Protection tab and verifying that the Status parameter on the Receiver Protection Scheme Parameters panel reads “Active”. 6-14 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
AUX alarm ports • 9500 MPRe ports See the “Port and channel object configuration” chapter in the 5620 SAM User Guide for more information about working with port objects. IMA support For 9500 MPR/9500 MPRe devices, IMA is supported on the 16 × E1 ASAP Access (ETSI) card.
5 to 8 on the 4+4 × Ethernet (EAS) card • ports 1 to 6 on the core-enhanced card • September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 81
Choose an Ethernet port to apply VLAN rate limiting and click on the Properties button. The VLAN Rate Limiter (Edit) form opens with the General tab displayed. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
Note — To configure the User Label parameter, you need to set the port usage type to SFP-O or SFP-E in step 7. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Set the Assigned Card Type parameter to 1 × STM (Channelized). Expand to the port level and right-click on Properties. The Physical Port [Edit] form opens with the General tab displayed. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
Page 84
Click on the OK button to save the change. A dialog box appears. Click on the Yes button. The Card [Edit] form closes. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Properties from the contextual menu. The Network Element (Edit) form opens with the General tab displayed. On the Network Element (Edit) form navigation tree, expand the Shelf icon. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
The Card Slot [Port Number], AUX, Shelf (Edit) form opens with the General tab displayed. Click on the External Point Inputs tab. 7-10 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Configure the Current OLC State and Revert OLC State parameters. Click on the OK button. A dialog box appears. Click on the OK button. The Physical Port (Edit) form closes. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-11...
Element (Edit) form opens with the General tab displayed. On the Network Element (Edit) form navigation tree, expand the Shelf icon. 7-12 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
In the From Port step, click on the Select button beside the From Port field. The Select From Port - Port Segregation form opens. Choose a port from the list. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-13...
The Card Slot (Edit) form reappears. Click on the OK button. A dialog box appears. Click on the Yes button. The Card Slot (Edit) form closes. 7-14 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Note — For Protection Type, 1+1 FD, Transmitter Protection Scheme parameters are not applicable. Click on the OK button. A dialog box appears. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-15 3HE 08459 AAAA TQZZA Edition 01...
Properties from the contextual menu. The Network Element (Edit) form opens with the General tab displayed. On the Network Element (Edit) form navigation tree, expand the Shelf icon. 7-16 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 93
The Physical Port (Edit) form closes. Note — If the card containing the ports is configured but not equipped, a loopback test cannot be performed on the physical ports of the card. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 7-17...
Page 94
7 — 9500 MPR/9500 MPRe port object configuration 7-18 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 95
9 — 9500 MPR service management and service tunnels 10 — 9500 MPR VLAN service management 11 — 9500 MPR VLL service management Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 96
September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
QoS policies define how network traffic is shaped and queued on one or more 9500 MPR and 9500 MPRe devices. You can use the 5620 SAM to create QoS policies that regulate data throughput on 9500 MPR and 9500 MPRe device ports.
8 — 9500 MPR/9500 MPRe QoS policies Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS policy Choose Policies→QoS→9500 MPR QoS→ 9500 ATM QoS from the 5620 SAM main menu. The 9500 ATM QoS Policies form opens. Perform one of the following: Configure the Policy scope parameter to Global.
ODU, MPT-HL, MPT-HC/MPT-MC. Choose Policies→QoS→9500 MPR QoS→ 9500 Radio Interface Queue Map from the 5620 SAM main menu. The 9500 Radio Interface Map Policies form opens. Perform one of the following: Configure the Policy scope parameter to Global.
5620 SAM User Guide. Procedure 8-3 To configure and distribute a 9500 NE QoS policy Choose Policies→QoS→9500 MPR QoS→ 9500 NE QoS from the 5620 SAM main menu. The 9500 NE QoS Policies form opens. Perform one of the following: Configure the Policy scope parameter to Global.
Page 102
To distribute the 9500 NE QoS policy, see the “Policies overview” chapter in the 5620 SAM User Guide. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 103
9.1 9500 MPR service management overview 9.2 9500 MPR service tunnel overview 9.3 Ethernet (G.8032) rings 9.4 Configuring service tunnels on 9500 MPR devices 9-10 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
VLAN ID can be automatically assigned by the 5620 SAM or assigned by the user. When the 5620 SAM assigns the VLAN ID, the ID is based on the VLAN group that the endpoint 9500 MPR belongs to.
The 5620 SAM supports automatic discovery for service-in-service associations created with the 9500 MPR. Service-in-service refers to a transport service that carries services for network routers. Automatic discovery allows the 5620 SAM to automatically associate a transport service with a service tunnel when a physical link is created between the 9500 MPR and a non-MPR NE.
Page 106
Limited Discovery 9.0 R5 (hop-based) button from Auto 10.0 R5 or later Hop-based services related to Ethernet LAGs (2 of 3) September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
• Services and VLAN paths are only supported on the MSS-x shelf. • You cannot configure the radio-end of the service using the 5620 SAM. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01...
• The conversion of ring path to tail-based ring path is not supported • The discovery of VLAN paths and services by the 5620 SAM is based on the service components deployed on the nodes. • The MAC address for services involving the TDM2TDMoETH service profile is automatically calculated and populated based on unicast or multicast.
LSPs that are bound to SDPs on the service. See the “Service tunnels” chapter in the 5620 SAM User Guide for the complete list of supported objects that service tunnels can be configured for, and for more service tunnel information.
One designated node, the RPL Owner (also referred to as the master node), is responsible to block traffic over the RPL. September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
9500 MPR ERPS tail node support on Ethernet (G.8032) rings Previous releases of the 5620 SAM had a limitation that all services could only begin and end on Ethernet (G.8032) rings on the 9500 MPR. The 5620 SAM extends EPS support to include tail nodes that connect to ERPS ring nodes.
Configuring service tunnels on 9500 MPR devices Use the following procedures to configure service tunnels for 9500 MPR devices. See the “Service tunnels” chapter in the 5620 SAM User Guide for the generic procedures that apply to this device type.
Page 113
Click on the OK button to save the changes and close the Network Element [Edit] form. Create the radio ring representation Choose Manage→Service Tunnels from the 5620 SAM main menu. The Manage Service Tunnels form opens. Click on the Create button and choose Radio Ring from the contextual menu. The Radio Ring, new Object [Create] form opens with the General tab displayed.
Page 114
Note 2 — When you create a VLL or VLAN service for the 9500 MPR, select the Ring Based path type. Note 3 — The 5620 SAM allows you to discover fiber Ethernet rings created by the NEtO. However, the 5620 SAM does not support creation of fiber ring elements and topology.
Page 115
10.2 Workflow to create VLAN services on 9500 MPR devices 10-3 10.3 VLAN service management procedures for 9500 MPR devices 10-4 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 10-1 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
See chapter for service creation information for 9500 MPR devices. See the “VLAN service management” chapter in the 5620 SAM User Guide for more information about VLAN service creation. Supported VLAN services types for 9500 MPR devices...
Auto—A user defines the head end of the VLAN path, the hops the VLAN path takes, and optionally, the bandwidth requirements, and whether the shortest path should be used. The 5620 SAM determines the appropriate available route for the VLAN path.
VLAN service; see the 5620 SAM User Guide. Delete a VLAN group or group member; see Procedure 10-6. Delete a 9500 MPR VLAN path; see Procedure 10-7. Modify or delete a VLAN service; see the 5620 SAM User Guide. 10.3 VLAN service management procedures for 9500 MPR...
Note 3 — You can also use this procedure to provision a VLAN path for a tail node. Choose Manage→VLAN→Paths from the 5620 SAM main menu. The Manage VLAN Paths form opens. Click on the Create button. The Create VLAN Path form opens with the Path Type step displayed.
Page 120
If you set the Creation Type parameter option to Auto or Point 2 Point, go to step 30. Configure the Minimum Bandwidth (kbps) parameter. Click on the Next button. The Define Source Site step appears. 10-6 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 121
Click on the Next button. The Possible Vlan Paths step appears. For the non-Auto option, click on the Insert Hop button to insert a VLAN path hop. The Hop (Create) form opens. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 10-7...
Page 122
Click on the Finish Button to save the VLAN path configuration. Click on the Close button. The Create VLAN Path form closes. Close the Manage VLAN Paths form. 10-8 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Click on the System Settings tab and set the Bridge Type parameter to 802.1Q. Close the 9500 MPR properties form. Choose Create→Service→VLAN from the 5620 SAM main menu. The VLAN Service (Create) form opens with the General tab displayed. Click on the Select button to choose a customer to associate with the 9500 (dot1q) VLAN service.
Page 124
VLAN (Create) form reappears with the group information displayed. Perform one of the following: Enable the Auto-Assign ID parameter. The 5620 SAM chooses the VLAN ID when the Auto-Assign ID parameter is enabled. Disable the Auto-Assign ID parameter to configure the VLAN ID parameter.
Page 125
Select an ERPS tail terminating port and click on the OK button. The VLAN (Create) form reappears. Click on the OK button to close the VLAN Site (Create) form. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 10-11...
Page 126
Click on the OK button. A dialog box appears. Click on the OK button. The CoS Rate Limiter (Create) form closes. 10-12 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Procedure 10-5 To discover 9500 MPR VLAN services The 9500 MPR VLAN services are not discovered automatically during NE discovery. Perform this procedure after all 9500 MPR NEs are synchronized in the 5620 SAM. Note — A prerequisites for discovering VLAN services on the 9500 MPR is that the nodes that are part of the VLAN service must be contained in a VLAN group.
VLAN paths appears. Note — If VLAN paths are already in your network, the 9500 MPR NE that the path traverses is auto-discovered by the 5620 SAM. The paths appear in the Manage VLAN Paths form with a name with the following syntax: Discovered-VLANPath-<IP address of the source 9500 MPR>-<IP...
Page 129
11.2 Workflow to create VLL services on 9500 MPR devices 11-2 11.3 VLL service management procedures for 9500 MPR devices 11-3 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 11-1 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
11.1 9500 MPR VLL service management overview The 5620 SAM supports the provisioning of VLL services on 9500 MPR devices. A VLL service is an L2 point-to-point service that connects access interfaces. A VLL service is completely transparent to customer or subscriber data and to control protocols.
Delete a VLAN group or group member; see Procedure 10-6. Delete a 9500 MPR VLAN path; see Procedure 10-7. Modify or delete a VLL service; see the 5620 SAM User Guide. 11.3 VLL service management procedures for 9500 MPR devices Use the following procedures to perform VLL service creation and management tasks for 9500 MPR devices.
Page 132
Click on the Select button to choose a terminating port for the L2 access interface. The Select Terminating Port - L2 Access Interface form opens. 11-4 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 133
Click on the OK button. The L2 Access Interface (Create) form closes, and the Apipe Site (Create) form reappears with the new interface information displayed in the service navigation tree. Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 11-5...
Note — If service creation fails or generated NE inconsistencies occur, see Procedure 4-2. Procedure 11-2 To create a VLL Cpipe service on a 9500 MPR Choose Create→Service→9500 VLL→Cpipe (CEM to CEM/Eth) from the 5620 SAM main menu. The Cpipe Service (Create) form opens with the General tab displayed.
Page 135
VLAN path. Note 2 — You cannot create VLL Cpipe services on a 9500 MPR using the 5620 SAM if the associated VLAN path spans across adjacent physical links. The VLL Cpipe service must have at least one radio link. If required, contact your Alcatel-Lucent technical support representative for alternative VLL Cpipe service configuration options.
Page 136
If you need to create another L2 access interface for the site in the Cpipe service, repeat steps to 21. 11-8 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Procedure 11-3 To fix a failed cross-connection in a 9500 MPR VLL Cpipe service The 5620 SAM may fail to establish one or more cross-connects when you deploy a 9500 MPR Cpipe service, or a cross-connect may fail after the service is created. If you determine that a service is down because of a failed cross-connect, you can try to re-establish the cross-connect.
Perform this procedure to add a GNE site and GNE service interfaces to a VLL service. This procedure applies to 9500 MPR VLL Apipe and Cpipe services. Choose Manage→Service→Services from the 5620 SAM main menu. The Manage Services form opens.
Procedure 11-5 To discover 9500 MPR VLL services The 9500 MPR VLL services are not discovered automatically during NE discovery. Perform this procedure after all 9500 MPR NEs are synchronized in the 5620 SAM. Note — If any of the discovered nodes contain ring instances, they should be added to ring elements before using the hop or ring-based discovery button.
Page 140
11 — 9500 MPR VLL service management 11-12 September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
9500 MPR SAM-E license functionality A.1 9500 MPR SAM-E license functionality Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 144
A. 9500 MPR SAM-E license functionality 9500 MPR SAM-E license functionality This appendix describes 5620 SAM functionality with a 9500 MPR SAM-E license. The SAM-E module restricts end to end functionality to basic node management. In this scenario, customers are expected to use a craft tool such as NEtO for service management.
Page 145
- PM adaptive modulation - PM Ethernet counters (statistics) over radio Same as in NEtO TX and traffic port (2 of 5) Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 146
Archiving of network data on a configurable period of time Service Provisioning X-connect (create/delete) 5620 SAM per NE X-connection based Service profiles (3 of 5) September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 147
End to end SDH2SDH traffic provisioning P2P path creation and visualization Network L2 Route & metric / hop cost - e2e correlation (4 of 5) Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Page 148
Auto tunnel creation - N x (1+0) - P2P Auto tunnel creation - N x (1+0) - P2MP (5 of 5) September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 3HE 08459 AAAA TQZZA Edition 01 MPR User Guide...
Customer documentation and product support Customer documentation http://www.alcatel-lucent.com/myaccess Product manuals and documentation updates are available at alcatel-lucent.com. If you are a new user and require access to this service, please contact your Alcatel-Lucent sales representative. Technical Support http://support.alcatel-lucent.com Documentation feedback...