Alcatel-Lucent 5620 Troubleshooting Manual page 189

9
10
11
12
Alcatel-Lucent 5620 Service Aware Manager, Release 6.1 R3
3HE 04244 AAAB Ed. 01
Enter y ↵ to apply the filter to the current log display. LogViewer applies the
filter.
viii Enter the following to return to display mode:
return ↵
LogViewer enters display mode. The log updates are filtered before they are
displayed.
To list the available log files, perform the following steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
list ↵
LogViewer lists the available log files.
iii Enter the following at the prompt to return to display mode:
return ↵
To display statistics about the current LogViewer session, perform the following
steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
stats ↵
LogViewer displays statistics about the current session.
iii Enter the following at the prompt to return to display mode:
return ↵
To reset the statistics counters for the current LogViewer session, perform the
following steps.
Press ↵ to enter command mode.
i
ii Enter the following at the prompt:
reset ↵
LogViewer resets the counters.
iii Enter the following at the prompt to return to display mode:
return ↵
Enter the following at the prompt to close LogViewer:
quit ↵
Troubleshooting Guide
6 — 5620 SAM LogViewer
November 2008 6-19