Alcatel-Lucent 5620 Troubleshooting Manual page 178

6 — 5620 SAM LogViewer
6
7
8
9
10
11
12
6-8
To view the raw log-file text of one or more entries, select the entries. The entry
text is displayed on the Preview sub-tab.
To restrict the list of displayed entries to a specific debug level, choose a debug
level from the drop-down list under the Level column header.
To find log entries that contain a specific text string, perform the following steps.
i Choose Edit→Find from the LogViewer main menu. The Find form opens.
ii Specify a text string to search for using the text field and search options on
the form.
Note — The LogViewer Find function does not support the use of
regular expressions.
iii Click on the Find button, as required, to find the next list entry that contains
the text string.
iv To find all list entries that contain the text string, click on the Find All
button. The Find form closes and a new log tab opens to display the result of
the search.
v Close the Find form if it is open.
Note — After you close the Find form, you can use the F3 key or the
Find next button on the main tool bar to perform repeated find
operations for the same text string on the same log tab.
To remove one or more log entries from the current view, perform one of the
following.
a To clear all listed log entries, choose Log→Clear All Events from the
LogViewer main menu, or click on the Clear all button in the main tool bar.
b To clear the currently selected log entries, choose Log→Clear Selected
Events from the LogViewer main menu, or click on the Clear selected button
in the main tool bar.
To apply a quick filter, enter a regular expression as a match criterion in the field
below a column header and press ↵. The list is cleared, and only subsequent log
entries that match the criterion are displayed. See Procedure
information about using filters.
Repeat 10 step to apply an additional quick filter, if required.
To apply a saved filter, perform the following steps.
i Choose Log→Add Filter from the LogViewer main menu, or click on the Add
filter button in the main tool bar. The Select Filters form opens.
ii Select one or more filters in the list and click on the OK button. The filters
are applied to the log view and are listed on the Filters sub-tab of the log tab.
November 2008 Alcatel-Lucent 5620 Service Aware Manager, Release 6.1 R3
Troubleshooting Guide
6-3 for more
3HE 04244 AAAB Ed. 01