Alcatel-Lucent 5620 Troubleshooting Manual page 109

Alarm name, ID, type, and probable
cause(s)
Alarm name: RadisuAcctPlcyFailure
Alarm ID: 363
Type: radiusAccountingPolicyAlarm (38)
Probable cause:
radiusAccountingRequestFailure (260)
Alarm name, ID, type, and probable
cause(s)
Alarm name:
HostConnectivityLostRateExceeded
Alarm ID: 276
Type: communicationsAlarm (4)
Probable causes:
•
hostDown (208)
•
trapDropped (209)
Alarm name, ID, type, and probable
cause(s)
Alarm name: GroupDown
Alarm ID: 69
Type: ProtocolAlarm (1)
Probable cause: protocolDown (1)
Alarm name: RipAuthenticationFailure
Alarm ID: 70
Type: authenticationAlarm (14)
Probable cause: authFailure (46)
Alarm name: RipAuthenticationMismatch
Alarm ID: 71
Type: authenticationAlarm (14)
Probable cause: authTypeMismatch (45)
Alarm name: RipDown
Alarm ID: 72
Type: ProtocolAlarm (1)
Probable cause: protocolDown (1)
Alcatel-Lucent 5620 Service Aware Manager, Release 6.1 R3
3HE 04244 AAAB Ed. 01
Table 3-40 Domain: radiusaccounting
Alarm severity, object type,
domain, and self-clearing attribute
Severity: Major
Object Type (class): Policy
Domain: radiusaccounting
Self-clearing alarm raised: No
Table 3-41 Domain: ressubscr
Alarm severity, object type,
domain, and self-clearing attribute
Severity: Major
Object Type (class): ShcvSite
Domain: ressubscr
Self-clearing alarm raised: No
Table 3-42 Domain: rip
Alarm severity, object type,
domain, and self-clearing attribute
Severity: Critical
Object Type (class): Group
Domain: rip
Self-clearing alarm raised: Yes
Severity: Warning
Object Type (class): Interface
Domain: rip
Self-clearing alarm raised: No
Severity: Warning
Object Type (class): Interface
Domain: rip
Self-clearing alarm raised: No
Severity: Critical
Object Type (class): Site
Domain: rip
Self-clearing alarm raised: Yes
Troubleshooting Guide
3 — Troubleshooting network alarms
Additional information
The alarm is raised when a RADIUS
accounting request is not
successfully sent to any of the
RADIUS servers specified in the
RADIUS accounting policy.
Additional information
The alarm is raised when the number
of SHCV host connectivity loss events
that is defined as the maximum
permitted for a SAP has been
exceeded. If the specified SHCV
action is to remove the host
information, the host information is
removed and the host is not tested
for connectivity again.
Additional information
—
The alarm indicates the peer
address.
The alarm indicates the peer
address.
—
November 2008 3-71