Lan Ip Screen - ZyXEL Communications LTE3301 Series User Manual

LAN and WAN IP Addresses
Fig ure 49
The LAN parameters of the LTE3301 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS server
address(es), read the embedded Web Configurator help regarding what fields need to be configured.
8.4 L AN IP Sc re e n
Use this screen to change the IP address for your LTE3301. Click
Network > LAN > IP
Fig ure 50
The following table describes the labels in this screen.
Table 32 Network > LAN > IP
L ABEL
IP Address
IP Subnet Mask
Apply
Cancel
Chapter 8 LAN
DESC RIPT IO N
Type the IP address of your LTE3301 in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your LTE3301 will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the LTE3301.
Click to save your changes back to the LTE3301.
Apply
Click to begin configuring this screen afresh.
C a nc e l
LTE3301 Series User's Guide
81
.
Ne two rk > L AN > IP