ADVANCED FEATURES
Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine's memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User Pa-
rameter List if you press and Start.
2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the dis-
play.
3. Press until the settings for switch 05
are shown.
The setting that you need to change is
that for digit 1.
4. If you wish to change the setting, press
1 on the ten key pad.
5. Finish: Yes and Function.
Cross-references
Substitute Reception: see page 83.
Memory Lock: see page 125.
## $#### ####
Digit 1 (Double Underlined)
0: Messages are not rejected.
1: Messages are rejected.
Confidential Reception: see page 121.
Forwarding: see page 133.
RECEPTION
129