Table of Contents
Advertisement
7. Troubleshooting
Error & Status Messages on the Control Panel
This section explains what the messages that appear on the control panel mean and what to do when a
particular message appears.
Depending on the "Auto Continue" and "Env.Slctr.Alert" settings specified on the System menu, some of the
following messages might not appear.
• See p.178 "Specifying System Settings using the Control Panel (System Menu)"
Control Panel Error Messages
Cannot recover error page(s) / FormFeed to print remaining
When the printer resumes printing after the paper jam has been cleared, some page(s) has/have been
missed.
To print the remaining pages after the missed page(s), press the [Form Feed] key. To delete the print job,
press the [Job Reset] key.
See p.282 "Cannot Recover Error Page".
7
Cannot use High Temp. / Power Off On
The temperature is abnormally high.
Switch the printer off and then on. If the message reappears, contact your service representative.
See p.278 "Out of Printable Temperature Range".
Cannot use Low Temp. / Power Off On
The temperature is abnormally low.
Switch the printer off and then on. If the message reappears, contact your service representative.
See p.278 "Out of Printable Temperature Range".
Change Setting Tray #
The size of paper in the selected tray does not match the specified paper size.
Load the tray with paper of the specified size, and then change the paper size setting for the tray on the
control panel. Alternatively, press the [Form Feed] key, select a tray containing paper of the specified size,
and then print. To cancel the print job, press the [Job Reset] key.
See p.254 "No Paper/Tray Not Detected (Tray 1)", p.256 "No Paper/Tray Not Detected (Tray 2/Tray
3)", p.258 "No Paper/Tray Not Detected (Bypass Tray)".
Change Settings Tray #
The type of paper in the selected tray does not match the specified paper type.
248
Advertisement
Table of Contents
Troubleshooting
