Ricoh FAX2700L Operator's Manual page 139

ADVANCED FEATURES
Cross-references
RTI and CSI: see page 38.
TCR: see page 172.
Switching Authorized Reception On/Off
Before you use Authorized Reception, you have to switch it on using Function 62.
If it is switched off, the machine will accept any incoming fax message.
1. Function 6 2 2 2 2 6 2 and Yes.
2. Scroll through the list of features with

until the screen is as shown opposite.
3. Yes.
4. Change the on/off setting by pressing  or
.
5. Finish: Yes and Function.
Programming the List of the Senders for Authorized Reception
A terminal sending an incoming messages always identifies itself to your terminal.
The identification consists of an RTI code or a CSI code. When you specify the
senders for memory lock, you must program a list of these codes. Program the list
by Function 81 called "Special Terminal". (See page 149.)
Selecting Which Messages to Accept
You can select one of the following two things.

Accept incoming messages from the specified senders whose RTI/CSI are
programmed.

Accept incoming messages except those from the specified senders whose
RTI/CSI are programmed.
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
Wild Cards: see page 141.
   
  
 
 


 
  
     
RECEPTION













 


131