ADVANCED FEATURES
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press .
2. Yes.
3. Store a forwarding station number.
Example: 2125551234
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as your
machine. And press Yes.
4. Either:
-If you wish all incoming messages to be
forwarded to this station: No.
Do not store any RTIs/CSIs for it.
If you only wish messages from certain
senders to be forwarded to this station:
Input their RTIs or CSIs (messages from
senders other than these will not be for-
warded to this station): Yes and go to
step 5.
5. Type in an RTI or CSI.
How to enter characters, see page 7.
6. Yes.
7. Either:
-Store this RTI as a wild card: Yes
-Otherwise: No
8. Either:
- If you want to store another RTI/CSI,
press Yes and go to step 5.
- Otherwise: No and go to step 9.
"
RECEPTION
!
!
135