Table of Contents
Advertisement
4. Either:
Scroll through the switches with and until the required switch appears.
Then go to step 3.
Finish: Yes and Function.
The user parameter switches are outlined below.
Switch 00 - Home position settings
Digit
Stamp
0
Contrast home position
1
2
3
Resolution
4
5
Transmission mode
6
7
Halftone
Switch 01
Digit
0 to 6
Do not change these settings.
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
setting before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.
Switch 02 - Printing of various items on received messages
Digit
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Feature Expander required).
0
0: Off
Center mark
1
The center mark is not printed when the machine is used for making copies.
2
Do not change this setting.
3
TSI printing
4 to 7
Do not change these settings.
0: Off
1: On (successfully scanned documents will be marked)
Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
0
0
0
Normal
0
0
1
Lighten
0
1
0
Darken
Digit 5 Digit 4 Setting
0
0
Standard
0
1
Detail
0: Memory transmission
1: Immediate transmission
0: Off
Forwarding Mark
1: On
HOW TO USE THIS MANUAL
Purpose
1
X
Digit 5 Digit 4 Setting
1
0
1
1
1: On
Purpose
Purpose
0: Off
0: Off
X
Do not use this
setting.
Fine
Do not use this.
1: On
1: On
11
Advertisement
Table of Contents
