Ricoh FAX2700L Operator's Manual page 173

ADVANCED FEATURES
8. Repeat from the step 5 for the second
timer. Press
to move the cursor under
the time.
And input the time 1 8 0 0, for example,
from the ten key pad for the timer value.
And press Yes.
KEEPING THE HEATER ON ALL DAY: Set both timers to ON = 00:00.
KEEPING THE HEATER OFF ALL DAY: Set both timers to OFF = 00:00.
9. Either:

Program the timer for another day: Go back to step 3.

Finish: Yes and Function.
NOTE: To print the received messages while the heater is off, press any key. After all the
messages have been printed, the heater will stay on for 5 minutes before switching off again.
Because of this, the Night timer does not give you complete security for received documents.
For this type of security, use the Memory Lock feature; see page 125.
Temporarily Switching the Heating roller
During the Night Timer cycle that the heating roller is off, it may be switched back
on:

When you hold the Energy Saver key for a few seconds.

When you insert a document in the feeder.

When you pick up the handset, or press On Hook Dial key.
After you leave the machine alone for a while, the heating elements will turn back
off. Note that if the automatic saver mode is disabled by a service technician, the
night timer will not turn back on.

&

   ####

&

   (##
OTHER
  
  
165