AUTOMATICALLY PRINTED REPORTS
Switching Reports On/Off
Some of these reports can be switched on or off.
To switch a report on or off, do the following. (See page 11 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 a nd Yes.
2. Yes.
The settings for switch 0 are now shown
on the bottom line of the display.
3. Press until the settings for switch 03
are shown.
Each digit from 0 to 7 controls one of the
reports (except digit 1) as follows.
Digit
Transmission result report (memory transmission)
0
1
Do not change this setting.
2
Memory storage report (File Reserve Report)
3
Polling reserve report
4
Polling result report (polling reception)
Transmission result report (immediate transmission)
5
6
Polling clear report
7
TCR
4. If you wish to change a setting, press the appropriate key on the keypad. For
example, to change digit 2, press 2 of the ten key pad.
5. Finish: Yes and Function
174
Digit
Purpose
0: Off
1: On
0: Off
1: On
0: Off
1: On
0: Off
1: On
0: Off
1: On
0: Off
1: On
0: Off
1: On
REPORTS
7 6 5 4 3 2 10