Adjusting The Document Feeder - Ricoh FAX2700L Operator's Manual

SOLVING PROBLEMS

Adjusting the Document Feeder

Depending on the thickness of the paper, three settings can be selected; thin,
normal, and thick.
1. Open the operation panel.
2. To meet the paper type to be scanned, adjust the lever position as shown in
the following table.
Paper Thickness
Thin
Normal
Thick
To correct document feed problems, adjust the lever position as shown in the
following.
Problem
Multi-feed Thin sheet
Multi-feed Thin sheet
Feed Jam
Non-feed
Note: In a new machine the setting is middle position.
202
Pressure
Low
Normal
High
Position
1
3
1
3
3
Position
1
2
3
DOCUMENT JAMS
1
2