ADVANCED FEATURES
Storing a Keystroke Program
1. Make sure that the machine is in
standby mode (see page 60).
2. Place a sheet of paper in the feeder.
Skip step 2 if you are making a Polling
Reception program.
3. Select all required features (such as
Transfer Request) and telephone num-
bers as you would normally do.
Contrast, resolution, and halftone cannot
be stored in a keystroke program.
4. Press the Quick Dial key that you wish to
store the program in.
Example: 01 of the Quick Dial
Make sure that this key is vacant.
5. To complete the program: Yes
Note: The procedure that you just stored will now begin. If you do not wish to
use the procedure now, press Stop immediately.
TRANSMISSION
97