Ricoh FAX2700L Operator's Manual page 71

ROUTINE OPERATION
If your machine is behind a PBX, dial the access code, then a pause, then the telephone
number. For an international number, place a pause after the country code. To input a pause,
press the Pause key.
5. Yes
6. Either:

Dial another number: Go to step 4.

Press Start.
The machine will dial the first destination (or, if you selected Send Later, it will
return to standby mode and the fax message will be sent at the time that you
selected).
NOTE: In theory, you can send the same fax message to up to 132 different
destinations using the above procedure. However, this number
depends on how many numbers are currently waiting in memory to be
dialed. See the table on page 54 for more information concerning the
limitations to this feature.
Transmission using the Group key
The followings are the procedure using the Group key. You have to program the
Group key into the Quick Dial 32. (Programming the Group Key. see page 53 .)
1. Place a document into the feeder.
2. Press 32 of the Quick Dial key (Group
key).
3. Enter a Group number.
Example 1; press 1 of the ten key pad.
4. Start.
Possible Problems
You want to take out the document
Open the scanner, and take out the document.
Caution: Do not pull out the document without opening the scanner, or you
will damage the machine.
SENDING A FAX MESSAGE

 
  


 
  





 


  


  


!"
 

63