Table of Contents
Advertisement
GLOSSARY
Page Retransmission:
If the terminal you are sending to indicates that it did not properly receive the
page you just sent, your terminal will resend that page from memory. This only
works if you used Memory Mode and if you are not using ECM. (ECM is a more
effective data retransmission method.)
Polling File:
This is a set of instructions (destinations to be polled, time of polling) for polling
reception.
Pulse Dialing:
This method of dialing uses a string of pulses to represent each dialed digit.
Reception:
The act of receiving a document.
Reduction:
If your document is wider than the paper available in the other terminal, your
terminal will automatically reduce it so that it will fit.
Remote Terminal:
The facsimile terminal that you are sending to or receiving from.
RTI:
Remote Terminal Identification.
page 38.
Sending:
Same as "Transmission", see below.
Standby Mode:
The terminal is said to be in standby mode when it is idle.
Terminal:
A facsimile terminal, such as your machine.
Tone Dialing:
This method of dialing uses a tone to represent each dialed digit.
Transmission:
The act of sending a document.
TTI:
Transmit Terminal Identification.
page 38.
219
Advertisement
Table of Contents
