Programming Quick Dial - Ricoh FAX2700L Operator's Manual

BEFORE YOU SEND YOUR FIRST FAX

Programming Quick Dial

This machine has 32 Quick Dial Keys (01 to 32), each of which can be
programmed as one of the following: Quick Dial Key, Group, Auto Document, or
Keystroke Program. The page number in the following table shows the location of
the programming procedure.
1 Quick Dial
Group
2
Keystroke Program
3
4 Auto Document
Using the following procedure, you can store telephone numbers as Quick Dials.
Note: You cannot use the following procedure to store Groups, Keystroke Pro-
grams or Auto Documents.
Programming a New Quick Dial
1. Press Function 3 1 and Yes.

At this time, you can print a Quick
Dial List if you press
and Start.
2. Press the Quick Dial Key that you wish
to program.
Example: Quick Dial 01
Note: Press the 01 of the Quick Dial Key
not 0 and 1 on the ten key pad.

If you pressed the wrong key, scroll using
and .
3. Yes.
4. Enter the telephone number at the opera-
tion panel's ten key pad.
If your machine is behind a PBX, include the access code and a pause before the telephone
number.For an international number, place a pause after the country code. To input a pause,
press the Pause key.
44
A fax or telephone number
A set of fax numbers that you often wish to
send the same fax to at the same time.
A program of settings, features, and
destinations.
A page that you often send, such as a map.
     

    



This page
Page 50
Page 96
Page 103