Error And Status Messages Appear On Smart Organizing Monitor - Ricoh SP 277 NwX Operating Instructions Manual

Error and Status Messages Appear on Smart
Organizing Monitor
"X" represents a displayed message that varies according to the situation.
Message
No Response from
I/O Device
Check the cable,
power cord, and
main switch.
Tray Not Detected or
No Paper
The indicated paper
source tray is not set
properly, or no
paper loaded.
Check the indicated
tray.
Paper Misfeed X A paper jam has occurred in the
machine.
Print Cartridge is The print cartridge is almost
near empty. empty.
No Toner The machine has run out of the
toner.
Toner has almost run
out.
Shortly printing
becomes not
available. Please
keep Print Cartridge
handy.

Error and Status Messages Appear on Smart Organizing Monitor

Causes
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Tray 1 has run out of
paper.
• The bypass tray has run out
of paper.
Solutions
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
• Load paper into Tray 1. See page 18
"Loading Paper".
• Load paper into the bypass tray. See
page 18 "Loading Paper".
Remove the jammed paper. See
page 71 "Clearing Misfeeds" and
page 77 "Paper Feed Problems".
Prepare a new print cartridge.
Replace the print cartridge. See page 61
"Replacing the Print Cartridge".
69