Ricoh FAX2700L Operator's Manual page 48

BEFORE YOU SEND YOUR FIRST FAX

To enter the RTI from the standby
mode, press Function 6 2 2 2 2 6
1 and Yes. And then press  until the
screen is as shown opposite. Then
press Yes.

If you have just enter the RTI in the
previous procedure, press Yes.
2. Either:
 If no TTI has been stored, input the
TTI using the Quick Dial keys and the
ten key pad.
 If a TTI has already been stored,
and/or you do not wish to edit: No and
go to step 4.
 To change or enter the TTI, press
Yes, then edit your TTI
Example: XYZ HEAD OFFICE
Note: Not more than 32 characters.
How to program characters, see page 7.
To edit the TTI to XYZ NY OFFICE for
Example move the cursor below H using

and . Press Clear four times and in-
put NY.
3. Press Yes to enter the TTI.
4. And you can enter the CSI continuously.
Either:
-Go to step 1 in the following procedure
of CSI programming.
- Press Function to return to the
standby mode.
CSI (Called Subscriber Identification)
Your CSI appears on the other party's operation panel during communication
instead of your RTI, if the other party's machine is another manufacturer's product.
The CSI can have up to 20 characters (only numbers and spaces can be used).
Enter your fax machine's telephone number, because some features of your
machine may not work if the CSI is not the same as the telephone number.
40

  #
"   
  #
"   

"   
!


!