Ricoh FAX2700L Operator's Manual page 135

ADVANCED FEATURES
Specifying Which Senders Messages to Lock in Memory
If you like to receive information from only select locations into memory lock, you
can program the RTI code or CSI code of those locations. A terminal sending an
incoming messages always identifies itself to your terminal. The identification
consists of an RTI or a CSI. When you specify the senders for memory lock, you
must program a list of these codes. Program the list by Function 81 called "Special
Terminal" (See page 149.)
Selecting Which Mesages to Lock in Memory
You have to select one of the following two things

Lock all messages from those specified terminals.
or

Lock all messages except those from specified terminals.
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User Pa-
rameter List if you press  and Start.
2. Yes.
3. The settings for switch 00 are now
shown on the bottom line of the display.
4. Press
until the settings for switch 09
are shown.
5. The setting that you need to change is
that for digit 0 (double underlined) and 1
(underlined).
Set one of the two as shown opposite.
6. Finish: Yes and Function.

 


  ## $#### ####

  #% $ #### ####
When you want to lock incoming mes-
sages in memory from specified termi-
nals;

  
If you lock all incoming messages ex-
cept those from specified terminals;

  
RECEPTION






127