Table of Contents
Advertisement
LOOKING AFTER THE MACHINE
4. On the new toner cassette, pull out the sheet. And remove the black sheet.
5. Slide the toner cassette into the machine
as far as it will go. Gently push down the
cassette to secure it in place.
CAUTION
Hold the cassette as shown in the illus-
tration.
Never touch the photoconductor inside
the machine (Green drum).
6. Remove the old cleaning pad.
7. Install the new cleaning pad.
Match the position of the arrow on the
cleaning pad with the arrow on the in-
side the machine.
Note: Push the cleaning pad until you
hear it clicking.
8. Close the upper cover and lower the op-
eration panel until it clicks.
Note: If the upper cover does not close,
the toner cassette or cleaning pad is not
correctly installed.
REPLACING THE TONER CASSETTE AND CLEANING PAD
185
Advertisement
Table of Contents
