Table of Contents
Advertisement
ADVANCED FEATURES
4. Yes.
5. Enter the ID code that you wish to use
for this message.
Example: 2 5 6 7 from the ten key pad.
Note: If you see ALREADY INPUT you already have a message on Secured
Polling standby.
To erase the old message: Clear the
old polling file by Function 23. (See
page 159.)
To keep the old message, repeat from
the step 3. And input another ID code.
6. Yes.
7. Start.
Your fax message is stored and held on polling standby.
NOTE: If you need to cancel a polling transmission operation, use Function 23
(see page 159).
OTHER
155
Advertisement
Table of Contents
