Ricoh FAX2700L Operator's Manual page 89

ROUTINE OPERATION
Using the Redial Key
The machine remembers the last telephone number that you input. If you have to
redial this number, just press the Redial key, then press the Start key.
This feature has the following uses.

If the machine is waiting to redial the other party, you do not have to wait for the
redialing interval to expire.
Press the Redial key, then press the Start key.

If you wish to send another message to the same address that you just sent
last time, you don't have to dial the full number again.
Place the message in the feeder, then press the Redial key, then press the
Start key.
To send a fax using Redial, do the following:
1. Make sure that the machine is in standby mode (see page 60).
2. Place your document into the feeder.
3. Press Redial.
4. Press Start.
SENDING A FAX MESSAGE

  % & #  
81