SENDING A FAX MESSAGE
TTI
Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch TTI off.
Note: If you switch TTI off, make sure that Label Insertion is also off if you want
the image received at the other end to be unmarked.
Cross-references
TTI: see page 39.
1. Press until the right display appears.
2. Yes.
3. If you wish to change the
press or until the displayed setting is
correct.
4. Yes when you have finished.
76
Label Insertion: see page 115
setting,
ROUTINE OPERATION