Table of Contents
Advertisement
TRANSMISSION
Changing the Batch Transmission On/Off
In a new machine, this setting is "Off". If you wish to change this setting, use the
following procedure. (See page 11 if you need more information about the User
Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
3. The settings for switch 00 are now
shown on the bottom line of the display.
4. Press until the settings for switch 06
are shown.
The setting that you need to change is
digit 4.
5. If you wish to change the setting, press
4 of the ten key pad.
6. Finish: Yes and Function.
Well Log Transmission
Using this feature, you can transmit a document that is longer than the maximum
limit, without having to cut it up into separate sheets. However, you must contact a
service technician to have this feature switched on. The name of this feature is
taken from oil well borehole surveying. A well log is a vertical profile of a borehole,
drawn to scale, showing important data. A well log can be several yards long.
Caution
If this feature is switched on permanently, users must stay by the machine while their
documents are being scanned. This is because, if the document jams, the machine may take
much longer than usual to recognize the jam; this could result in excessive wear and tear of
the mechanical components of the scanner.
If a jam does occur, press the Stop key immediately.
120
ADVANCED FEATURES
Digit 4(Double Underlined)
0: Batch Transmision off
1: Batch Transmission on
Advertisement
Table of Contents
