Table of Contents
Advertisement
Note: You can switch the TTI off for a particular transmission if you do not wish it
to be printed on your pages as they are printed at the other end. See
page 76.
RTI (Remote Terminal Identification)
Your RTI appears on the other party's operation panel during communication, if
the other machine was made by the same manufacturer as yours. The RTI can
have up to 20 characters (numbers and letters can be used, along with some
punctuation marks). Program something easy to recognize, such as your name,
company name, or department name within the company.
1. Press Function 6 2 2 2 2 6 1 and Yes.
2. Press until the screen is as shown op-
posite.
3. Press Yes.
4. Input the RTI using the Quick Dial key or
the ten key pad. (You can delete the char-
acter using Clear.)
Example: XYZ COMPANY
How to program characters, see page 7.
Note: RTI cannot be not more than 20 characters
5. Press Yes to program the RTI. You may then enter the TTI. Go to the step 1 in
the following procedure in order to enter the TTI.
TTI (Transmit Terminal Identification)
Your TTI is printed at the other end on the top edge of each page that you send.
The TTI can have up to 32 characters (numbers and letters can be used, along
with some punctuation marks). Program something easy to recognize, such as
your name, company name, or department name within the company.
1. Either:
BEFORE YOU SEND YOUR FIRST FAX
!
"
!
!
39
Advertisement
Table of Contents
