Ricoh FAX2700L Operator's Manual page 134

RECEPTION
4. Input the Memory Lock ID that you will
be using. Example: 6 7 5 4 from the ten
key pad.
5. Store the ID: Yes and Function.
Editing the Memory Lock ID
1. Function 6 2 2 2 2 6 1 and Yes.
2. Press
until the screen is as shown op-
posite.
3. Yes.
4. Yes.
5. No and input a new number.
6. Yes and Function.'
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 62.
After you switch Memory Lock on,
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 2 2 2 2 6 2 and Yes.
2. Scroll through the features with
until
the screen is as shown opposite.
3. Yes.
4. Change the on/off setting by pressing 
or
.
5. Finsh: Yes and Function.
If you wish, you can prevent unidentified senders from sending you messages while Memory
Lock is on. See page 129.
126
  

 
   
     
      

  

  

 
 
     
   

   



ADVANCED FEATURES


will appear on the display