Aligning The Needle Bar Linkage; Moving The Needle Bar Linkage Sideways - Dürkopp Adler 567 CLASSIC Service Manual

Aligning the needle bar linkage

10 Aligning the needle bar linkage
Order
First check the following setting:
• A straight and undamaged needle must be inserted
Correct setting
Set stitch length adjusting wheel to 0.
 The needle pierces exactly in the center of the feed-dog needle hole.

10.1 Moving the needle bar linkage sideways

Cover
• Arm cover ( 3.3.2 Removing and fitting the arm cover, page 11)
• Head cover ( 3.3.3 Removing and fitting the head cover, page 12)
Fig. 25: Aligning the needle bar linkage sideways
Service manual 567 classic - 01.0 - 10/2015
( Operating manual section, Inserting and replacing the needle)
WARNING
Risk of injury.
Crushing injuries from moving parts.
Switch off the sewing machine before aligning the
needle bar linkage sideways.
①
②
(1) - Adjusting wheel for the sewing foot
pressure
③
(2) - Setscrews
(3) - Openings
33