Lubrication Of The Upper Part Of The Machine - Dürkopp Adler 567 CLASSIC Service Manual

19.1.1 Lubrication of the upper part of the machine

The oil lubrication supplies all bearing points automatically with oil from the
reservoir.
Correct setting
The oil level is between the minimum level marking and the maximum
level marking.
Fig. 57: Lubrication of the upper part of the machine
Setting steps
1. Check the oil level indicator every day.
2. If the oil level is below the minimum level marking (3):
68
ATTENTION
Machine damage due to incorrect oil level
Too little or too much oil can result in damages to the machine.
Check the oil level every day and top up the oil, if necessary.
MAX
MIN
(1) - Refill opening
Pour oil through the refill opening (1) but no higher than the maximum
level marking (2).
Maintenance work
(2) - Maximum level mark
(3) - Minimum level mark
Service manual 567 classic - 01.0 - 10/2015