Winder
Setting steps
1. Loosen the screw (4).
2. Setting the spring travel: Turn the stop collar (1):
3. Setting the spring tension: Turn the tension disc (3):
4. Tighten the screw (4).
15 Winder
15.1 Setting the winder
Correct setting
The winder wheel runs smoothly and without axial play.
The winding process will stop automatically when the required filling quan-
tity of the bobbin is reached.
Cover
• Arm cover ( 3.3.2 Removing and fitting the arm cover, page 11)
Fig. 43: Removing the winder and setting the winder filling quantity
Service manual 567 classic - 01.0 - 10/2015
• Longer spring travel: Turn anticlockwise:
• Shorter spring travel: Turn clockwise:
• Greater spring tension: Turn anticlockwise:
• Less spring tension: Turn clockwise:
Do not twist the stop collar in doing so.
WARNING
Risk of injury.
Crushing injuries from moving parts.
Switch off the sewing machine before setting the
winder.
(1) - Screws
(2) - Setting screw
(3) - Winding lever
(4) - Arm
53