Aligning The Needle Bar Linkage Sideways - Dürkopp Adler D869 e-con Service Instructions Manual

Adjusting feed dog and needle bar linkage
7.2
Fig. 36: Aligning the needle bar linkage sideways (1)
(1) - Screws
(2) - Set collars
(3) - Screw
Proper setting
If the stitch length is 0, the needle pierces exactly in the center of the needle
hole.
To align the needle bar linkage sideways:
1. Switch off the machine.
2. Disassemble the front cover ( p. 20).
3. Disassemble the head cover ( p. 21).
4. Disassemble the tensioning plate ( p. 25).
5. Position the plates (4) of the stitch regulator flush.
6. Loosen the threaded pins (1) on the set collars (2).
7. Loosen the screw (3).
Service Instructions D869 e-con - 00.0 - 09/2023

Aligning the needle bar linkage sideways

①
② ③
(4) - Plates
(5) - Needle hole
(6) - Needle bar linkage
⑥
⑤
④
49