Maintenance work
19.2.3 Cleaning the filter element
Fig. 62: Cleaning the filter element
Cleaning steps
1. Drain the water condensation ( page 72).
2. Unscrew the water separator (2).
3. Unscrew the filter element (1).
4. Blow out the filter element (1) using a compressed air gun.
5. Wash out the filter tray using benzine.
6. Tighten the filter element (1).
7. Tighten the water separator (2).
8. Tighten the drain screw (3).
Service manual 567 classic - 01.0 - 10/2015
WARNING
Risk of injury.
Switch off the machine at the main power switch
and disconnect it from the pneumatic network
before you clean the filter element.
ATTENTION
Damage to the paintwork due to solvent-based cleaners.
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
6
4
8
2
10
0
1
2
3
(1) - Filter element
(2) - Water separator
(3) - Drain screw
73