Removing And Fitting The Arm Cover - Dürkopp Adler 567 CLASSIC Service Manual

Working basis

3.3.2 Removing and fitting the arm cover

Fig. 2: Removing and fitting the arm cover
Removing the arm cover
1. Turn the adjusting wheel for the sewing foot stroke (3) to 2.
2. Loosen the screws (1).
3. Hold the arm cover (2) on the adjusting wheel and remove it.
Fitting the arm cover
1. Turn the adjusting wheel for the sewing foot stroke (3) to 2.
2. Fit the arm cover (3).
3. Tighten the screws (1).
Service manual 567 classic - 01.0 - 10/2015
①
②
③
(1) - Screws
(2) - Arm cover
(3) - Presser foot stroke adjusting wheel
11