Maintenance work
19.1.2 Hook lubrication
The hook lubrication supplies the hook with oil from the reservoir.
Correct setting
The oil level is between the minimum level marking and the maximum
level marking.
Cover
• Tilt the upper section ( 3.3.1 Access to the machine bottom section,
Fig. 58: Hook lubrication
Setting steps
1. Check the oil level indicator every day.
2. If the oil level is below the minimum level marking (2):
Service manual 567 classic - 01.0 - 10/2015
ATTENTION
Machine damage due to incorrect oil level
Too little or too much oil can result in damages to the machine.
Check the oil level every day and top up the oil, if necessary.
page 10)
①
(1) - Refill opening
Pour oil through the refill opening (1) but no higher than the maximum
level marking (3).
(2) - Minimum level mark
(3) - Maximum level mark
③
②
69