Sp Descriptions; Operation Check - Ricoh MP C3004 Field Service Manual

3. Preventive Maintenance
• Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
• Close the ARDF or the platen cover.
• Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
4. Exit the User Tools mode, and then enter the SP mode.
5. Perform line adjustment.
SP2-111-004: Forced Line Position Adj. Mode d
The result can be checked with SP2-194-007 (MUSIC Execution Result Execution Result)
(0: Success, 1: Failure).
Also, results for each color can be checked with SP2-194-010 to 013.
6. Exit the SP mode.

SP descriptions

• SP2-194-007 (MUSIC Execution Result: Execution Result)
Displays the result code of MUSIC adjustment.
0: Success
1: Failure
• SP2-194-010 to 013 (MUSIC Execution Result: Error Result C,M, Y, K)
Displays the result code of MUSIC adjustment for each color.
0: Not done
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
4: Out of the adjustment range
5 to 9: Not used

Operation check

Check if the sample image has been copied normally.
482