HDD Encryption
Before You Begin the Procedure:
1.
Make sure that the following settings (1) to (3) are not at the factory default settings.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
If any of these settings is at a factory default value, tell the customer these settings must be changed
before you do the installation procedure.
2.
Confirm that "Admin. Authentication" is on:
[User Tools] icon - [Machine Features] - [System Settings] - [Administrator Tools] - [Administrator
Authentication Management] - [Admin. Authentication] - [On]
If this setting is off, tell the customer that this setting must be on before you can do the installation
procedure.
Icon [1]
This icon is lit when there is temporary data to be
overwritten, and blinks during overwriting.
Icon [2]
This icon is lit when there is no temporary data to be
overwritten.
Security Settings
465