NEC UNIVERGE SV8100 Features & Specifications Manual page 1074

Issue 5.0
Program
Number
16-01-05
16-01-06
16-01-07
16-01-09
16-01-10
16-02-01
20-13-13
1 - 1064
Program Name
Department Group Basic Data
Setup – Extension Group All
Ring Mode Operation
Department Group Basic Data
Setup – STG Withdraw Mode
Department Group Basic Data
Setup – Call Recall Restriction
for STG
Department Group Basic Data
Setup – Department Hunting No
Answer Time
Department Group Basic Data
Setup – Enhanced Hunt Type
Department Group Assignment
for Extensions
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Description/Comments
Set if all members of the group
should ring automatically (1) or
through the use of the service
code (0) defined in Program
11-12-09. Selecting automatic will
override the settings of Programs
16-01-03 and 16-01-04.
Use to set the STG withdraw
mode for each department group.
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
Set how long a call rings a
Department Group extension
before hunting occurs.
Set the type of hunting for each
Extension (Department) Group.
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Turn Off (0) or On (1) an extension
user ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
UNIVERGE Multimedia Conference Bridge
UNIVERGE SV8100
Assigned Data
0 = Manual
1 = Automatic
(default = 0)
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
64800 (seconds)
(default = 15 seconds)
0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not
Answered
3 = Hunting When
Busy or No Answer
(default = 0)
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
0 = Off
1 = On
(default = 1 for
COS 1~15)