NEC UNIVERGE SV8100 Features & Specifications Manual page 1102

Issue 5.0
Program
Number
20-13-05
20-13-06
20-13-07
20-13-12
20-13-13
20-13-16
20-13-28
20-13-35
22-02-01
1 - 1092
Program Name
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Class of Service Options
(Supplementary Service) –
Message Waiting
Class of Service Options
(Supplementary Service) – Room
Monitor, Extension Being
Monitored
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Class of Service Options
(Supplementary Service) –
Barge-In, Receive
Class of Service Options
(Supplementary Service) – Allow
Class of Service to be Changed
Class of Service Options
(Supplementary Service) – Block
Camp On
Incoming Call Trunk Setup –
Incoming Type
Description/Comments
Turn On (1) or Off (0) the ability of
an extension to receive Off-Hook
signals.
Allows a busy extension ability to
manually (0) or automatically (1)
receive Off-Hook signals.
Turns Off (0) or On (1) an
extension ability to leave Message
Waiting.
Turns Off (0) or On (1) an
extension ability to be monitored.
Turn Off (0) or On (1) an extension
user ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
In an extension Class of Service,
turn On (1) or Off (0) Barge-In at
the receiving extension (i.e.,
Barge-In receive).
Turn off or on the ability of an
extension COS to be changed via
Service Code 777.
Use this option to turn On (1) or
Off (0) extension ability to block
#
callers from dialing to camp-on.
Used to assign the incoming trunk
type for each trunk. There is one
item for each Mode. When using
Trunk-to-Trunk Forwarding the
trunks must be set for Normal (0).
Voice Mail Integration (Analog)
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)