User Program Mode - Ricoh Gestetner LANIER SAVIN G071 Service Manual

Rev. 04/2003

5.4 USER PROGRAM MODE

To activate the user program mode, press the menu key and use the up/down
arrow keys to scroll through the menu. To go back to a higher level, press the
escape key. After changing the settings, press the online key. The user menu list
can be printed using 'menu list' in the "List/Test Print" user mode.
User Mode Tree
User Mode Counter (Meter charge mode must be ON in SP mode.)
Sample Print (optional HDD required)
Locked Print (optional HDD required)
Paper Input
List/Test Print
Maintenance
System
SM
CÓPIA NÃO CONTROLADA
By-pass Size
Tray Paper Size
Paper Type
Tray Locking
Tray Priority
Image Density
Registration
Plain Paper Type
Maint. Reset
Clean/Adjust
HDD Format (optinal HDD required)
ROM Update (5-046 setting must be 0 in SP mode)
Key Repeat
Development Unit Check
Prt. Err Report
Auto Continue
Memory Overflow
Copies
Printer Lang.
Sub Paper Size
Paper Size
Duplex
Output Tray
Job Separation
Energy Saver 1
Energy Saver 2
Unit of Measure
Resolution
5-55
CÓPIA NÃO CONTROLADA
USER PROGRAM MODE
Host Interface I/O Buffer
I/O Timeout
Network Setup
PCL Menu Orientation
Form Lines
Font Source
Font Number
Font Size
Font Pitch
Symbol Set
Language
G070S517.WMF
G071