Optional Accessories Specifications - SATO TH2 Series Operator's Manual

Section 6: Basic Specifications

6.2 OPTIONAL ACCESSORIES SPECIFICATIONS

CUTTER KIT SPECIFICATIONS
Media Type
Media Size
Thickness
Self-diagnosis function
Durability
LINERLESS (NONESEPA) KIT SPECIFICATIONS
Kit Type
Media Type
Media Size
Thickness
Media Winding direction
Roll and core Diameter
Sensor Type
Label issuing mode
BATTERY SPECIFICATIONS
Model Name
Battery Type
Rated Voltage
Rated Capacity
Dimensions
Weight
Charge cycle
Charging time
Page 6-6
Width (including liner): 28 to 63 mm (1.10" to 2.48")
Pitch (including liner): 19 to 120 mm (0.74" to 4.72")
0.14 to 0.19 mm (0.006" to 0.007")
Linerless kit with cutter
Linerless Label
without perforated line
Width: 28 to 60 mm (1.1" to 2.3")
Pitch: 45 to 100 mm (1.7" to 3.9")
0.14 to 0.19 mm (0.006" to 0.007")
Maximum outer diameter: 75 mm (2.9") with Inner core diameter: 26 mm (1.0")
Cutter mode
43 mm (W) X 20.4 mm (D) X 109 mm (H)
Approximately 6 hours (Fully charges with the printer unit)
Approximately 1.5 hours ( Charged by dedicated charger)
Non-adhesive paper and Label
Cutter error detection
More than 300,000 cuts
Micro-perforated Linerless Label
Width: 28 to 60 mm (1.1" to 2.3")
Pitch: 25.4 to 100 mm (1" to 3.9")
Face-out
Label sensor (Reflective type)
Continuous mode, Tear-off mode
PT/MB400-BAT
Lithium ion battery
14.8 V
1700mAh (TYP)
1.7" (W) X 0.8" (D) X 4.3" (H)
Approximately 170 g (0.37 lbs)
Approximately 300 times
Linerless kit without cutter
TH2 Series Operator Manual